Abstract

Dielectric elastomer actuators (DEAs) can lead to surprisingly large deformations by applying an electric field. The biggest challenge for DEAs is to get a large actuated strain at a low electric field. Herein, a novel approach was used to largely improve the actuated strain at a low electric field of a thermoplastic polyurethane (TPU) dielectric elastomer (DE) by introducing polyethylene glycol (PEG) oligomer into the matrix. The dielectric constant (er) of TPU was obviously increased by adding PEG due to the combined effect of the increase in the interfacial polarization ability of TPU/PEG blends by the ionic conductivity of PEG and the increase in dipole polarization ability of TPU chain segments by the disruption of hydrogen bonds of TPU chains. Meanwhile, the elastic modulus (Y) of TPU was obviously decreased due to the plasticizing effect of PEG on TPU. The simultaneous increase in er and decrease in Y resulted in a 7500% increase in actuated strain at a low electric field (3 V μm−1) by adding PEG. The actuated strain (5.22% at 3 V μm−1) is considerably higher than that of other DEs at the same electric field reported in the literatures. Our work provides a simple and effective method to largely improve the actuated strain at a low electric field of a DE, facilitating the application of DE in biological and medical fields.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.