Abstract

Thermally reduced graphene oxide (TRG)/thermoplastic polyurethanes (TPU) dielectric elastomer with high dielectric constant (k), low dielectric loss and greatly improved actuated strain at low electric field was prepared by solution blending followed by in situ thermal reduction. The results showed that a good dispersion and alignment of TRG in the TPU matrix was obtained. The k at 103 Hz was sharply increased from 7 for pure TPU to 1875 for the composite with 2 vol. % of TRG because of the partial restoration of graphite structure and the great increase in dipole polarizability of TPU caused by the disruption of hydrogen bonds of TPU chains. The dielectric loss at 103 Hz of the composite with 2 vol. % of TRG remained low (0.43). Despite of the increase in elastic modulus with the increase in the content of TRG, the great increase in k lead to the great increase in electromechanical sensitivity (β). As a result, a 106 times increase in β at 103 Hz and 17 times increase in actuated strain at low electric field (250 V/mm) were achieved by adding 2.0 vol% of TRG. This study provides a simple and effective method for the improvement of actuated strain at low electric fields through partial reduction of graphene oxide and the disruption of hydrogen bonds in TPU, facilitating the applications of dielectric elastomers in the biological and medical fields, where a low electric field is required.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call