Large‐Area Schottky Barrier Transistors Based on Vertically Stacked Graphene–Metal Oxide Heterostructures

Abstract

Listen

Translate article

The fabrication of all‐transparent flexible vertical Schottky barrier (SB) transistors and logic gates based on graphene–metal oxide–metal heterostructures and ion gel gate dielectrics is demonstrated. The vertical SB transistor structure is formed by (i) vertically sandwiching a solution‐processed indium‐gallium‐zinc‐oxide (IGZO) semiconductor layer between graphene (source) and metallic (drain) electrodes and (ii) employing a separate coplanar gate electrode bridged with a vertical channel through an ion gel. The channel current is modulated by tuning the Schottky barrier height across the graphene–IGZO junction under an applied external gate bias. The ion gel gate dielectric with high specific capacitance enables modulation of the Schottky barrier height at the graphene–IGZO junction over 0.87 eV using a voltage below 2 V. The resulting vertical devices show high current densities (18.9 A cm−2) and on–off current ratios (>104) at low voltages. The simple structure of the unit transistor enables the successful fabrication of low‐power logic gates based on device assemblies, such as the NOT, NAND, and NOR gates, prepared on a flexible substrate. The facile, large‐area, and room‐temperature deposition of both semiconducting metal oxide and gate insulators integrates with transparent and flexible graphene opens up new opportunities for realizing graphene‐based future electronics.