Large temperature coefficient of resistivity (TCR) of La0.67Ca0.33MnO3 polycrystalline ceramics improved by optimizing sintering temperatures

Abstract

This work investigates fabrication of La0.67Ca0.33MnO3 (LCMO) polycrystalline ceramics using a facile sol–gel method at sintering temperatures (Ts) ranging from 1470 °C to 1540 °C and explores relationship between their electrical transport properties and Ts. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and X-ray photoemission spectroscopy were employed to characterize crystal structure, morphologies, element distributions, and Mn3+/Mn4+ ratio of the as-obtained LCMO ceramics. The influence of Ts on phase purity, microstructure, morphology, and electrical transport properties was also investigated. LCMO ceramics exhibit increased grain size and higher temperature coefficient of resistivity (TCR) at higher temperatures. An increase in Ts can reduce the strength of electron–lattice interactions and theoretical Curie temperature in LCMO ceramic samples, which can in turn optimize their electrical transport properties. Moreover, an increase in Ts enhances double-exchange (DE) effect to some extent. The DE effect further affects resistivity and metal–insulator transition temperature of material. Additionally, small-polaron hopping model and phenomenological percolation model were used to characterize electrical transport in metal–insulator transition region. The temperature at which TCR is maximum (265.78 K) and the largest TCR value (58.16 %) were achieved at a Ts of 1530 °C. By modulating the sintering temperature, we achieved LCMO ceramics with larger grains and enhanced electrical properties. This optimization renders materials suitable for highly sensitive infrared bolometer applications.