Abstract
(Na0.85K0.15)0.5Bi0.5TiO3 (abbreviated as NKBT) thin films were fabricated via an economical aqueous sol–gel method on Pt(111)/Ti/SiO2/Si substrates. Overdoping of volatile cations in the precursor solutions was necessary to achieve pure perovskite structure due to compensation of cations loss that occurred during heat treatment. Different annealing temperature was investigated to get the films with single perovskite phase detected by XRD patterns. Thin films of 250nm thickness exhibited a dielectric constant and a loss tangent at 100kHz of 519 and 0.058, respectively. A high effective piezoelectric coefficient (d33) of approximately 76pm/V was obtained via PFM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have