Abstract
Information on the flyer deformation during laser impact welding (LIW) is an important aspect to consider when high reliability of the welded components is required. For this reason, accurate numerical models simulating thermal and mechanical aspects are needed. In the present work, the cross-section morphology during LIW of Ti/Brass joints at varying laser pulse energies is modeled by a 2D finite element (FE) model. A hydrodynamic plasma pressure model able to describe the evolution of the pressure load step by step, taking into account the progressive deformation of the flyer, was implemented. Hence, this paper proposes an alternative method to the conventional node concentrated forces or predefined velocity as flyer boundary conditions. The levels of the equivalent plastic strain (PEEQ), shear stress, and critical flyer velocity at the collision point were used as reference parameters to predict the success of the welding bond, distinguishing the welded area from the unwelded area. The model was validated by comparison with the experimental data, which showed the effectiveness of the proposed FE code in predicting the cross-section morphology of the welded materials. Moreover, practical industrial information such as variation in the flyer impact velocity, collision angle, and process temperatures was predicted by varying the process laser pulse energy according to the basic principle of the process.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call