Laboratory performance of asphalt mixture with waste tyre rubber and APAO modified asphalt binder

Abstract

ABSTRACT In order to further explore the performance of mixture with waste tire rubber (WTR) and amorphous poly alpha olefin (APAO) modified asphalt, the 12%WTR+4%APAO and 15%WTR+4%APAO modified asphalt mixtures were selected as research objectives. The asphalt mixtures with matrix asphalt, WTR modified asphalt, and SBS modified asphalt were prepared for comparative analysis. Through the mixture design, the optimum asphalt-aggregate ratio of five asphalt mixtures was determined respectively. The volumetric parameters and resilient modulus were studied. The laboratory performances were studied by standard Marshall stability test, wheel tracking test, immersion Marshall test, freeze–thaw splitting test, indirect tensile strength test, indirect tensile fatigue test, and Marshall stability after long-term aging test. Compared with the other three asphalt mixtures, the results showed that the 12% WTR+4%APAO modified asphalt mixture had the highest Marshall stability and high-temperature performance. While the 15% WTR+4%APAO modified asphalt mixture had better permanent deformation resistance at high temperatures, moisture stability, aging resistance, and relatively good fatigue performance. The statistical hypothesis test results also confirmed that WTR/APAO modified asphalt has a significant effect on mechanical properties. Based on the results of various performance, the 15% WTR+4% APAO was the optimal content for asphalt mixture.