Laboratory and field evaluation of a small form factor head impact sensor in un-helmeted play

Abstract

Head impact sensors are increasingly used to quantify the frequency and magnitude of head impacts in sports. A dearth of information exists regarding head impact in un-helmeted sport, despite the substantial number of concussions experienced in these sports. This study evaluated the performance of one small form factor head impact sensor in both laboratory and field environments. In laboratory tests, sensor performance was assessed using a Hybrid III headform and neck. The headform assembly was mounted on a low-friction sled and impacted with three sports balls over a range of velocities (10–31 m/s) at two locations and from three directions. Measures of linear and angular acceleration obtained from the small form factor wireless sensor were compared to measures of linear and angular acceleration obtained by wired sensors mounted at the headform center of mass. Accuracy of the sensor varied inversely with impact magnitude, with relative differences across test conditions ranging from 0.1% to 266.0% for peak linear acceleration and 4.7% to 94.6% for peak angular acceleration when compared to a wired reference system. In the field evaluation, eight male high school soccer players were instrumented with the head impact sensor in seven games. Video of the games was synchronized with sensor data and reviewed to determine the number of false positive and false negative head acceleration event classifications. Of the 98 events classified as valid by the sensor, 20.5% (20 impacts) did not result from contact with the ball, another player, the ground or player motion and were therefore considered false positives. Video review of events classified as invalid or spurious by the sensor found 77.8% (14 of 18 impacts) to be due to contact with the ball, another player or player motion and were considered false negatives.