Abstract
Gold nanoparticles (AuNPs) embedded in chitosan (CHI) film, well-dispersed and smaller in size (about 10 nm), were fabricated by one-step electrodeposion on Au microelectrode in solution containing chitosan and chloride trihydrate. The nano-structure CHI-AuNPs composite film offers abundant amine groups, good conductivity, excellent biocompatibility and stability for antibody immobilization. The combination of aflatoxin B1 (AFB1) with immobilized antibody introduces a barrier to electron transfer, resulting in current decreasement. The morphologies and characterizations of modified microelectrodes were investigated by scanning electron microscope (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Fourier transform infrared spectroscopy (FT-IR). The proposed non-enzyme and label-free immunosensor exhibited high sensitive amperometric response to AFB1 concentration in two linear ranges of 0.1 to 1ng mL−1 and 1 to 30ng mL−1, with the detection limit of 0.06ng mL−1 (S/N=3). The immunoassay was also applied for analysis of maize samples spiked with AFB1. Considering the sample extraction procedure, the linear range and limit of detection were assessed to be 1.6–16ng mL−1 and 0.19ng mL−1 respectively. The simple method showed good fabrication controllability and reproducibility for immunosensor design.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call