La0·8Mn0·2FeO3 impregnated ceramic membrane for membrane fouling elimination via peroxymonosulfate activation

Abstract

To endow SiC ceramic membranes a catalytic self-cleaning capability, a pore-functionalized SiC ceramic membrane with impregnated a perovskite-type catalyst La0·8Mn0·2FeO3 was fabricated by a urea-assisted one-step combustion method. Diffraction of X-ray (XRD), canning electronic microscopy (SEM) with an energy dispersion X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were employed to investigate the effects of the impregnating of La0·8Mn0·2FeO3 on SiC membrane pore-structure (La0·8Mn0·2FeO3-CM). The catalytic self-cleaning performance of the as-prepared membranes was assessed through peroxymonosulfate (PMS) activation under a cross-flow filtration mode. Results indicate that La0·8Mn0·2FeO3 has been successfully impregnated into the macropores of SiC membranes without pore blocking, and 92.4 % of the flux recovery rate (FRR) was achieved when the PMS concentration was 70 mM and catalytic flushing time was 45 min. Therefore, the La0·8Mn0·2FeO3 impregnated SiC membrane exhibited excellent catalytic self-cleaning property, which can effectively avoid the environmental pollution and the deterioration of membrane materials caused by chemical cleaning for membrane fouling. In addition, the radical quenching experiment and electron spin resonance (EPR) tests were conducted in the catalytic self-cleaning process, and the results suggested that the hydroxyl radical (⋅OH) and sulfate radical (SO4•‾) are simultaneously captured and ⋅OH is the dominant active species. This study embarks on a novel and environmental friendly membrane cleaning approach for irreversible fouling eliminates in diverse membrane separation applications.