Abstract
Iron sand is obtained from one of the waste treatments stages of bauxite residue called red mud, operated at PT. Indonesia Chemical Alumina (PT. ICA). Preliminary analysis of the sand indicates that the main element contained in the sand is iron with a percentage of up to 60% and titanium at 10%. This study aims to determine the elemental composition and mineral characteristics of sand that was separated magnetically from the iron sand. Magnetic separation was carried out in two stages, namely separation using a weak magnets and strong magnets. The separation resulted in approximately 71% of strong magnetic sand. The rest was separated using the strong magnet giving almost 70% of weak magnetic sand while the residue is non-magnetic sand. The weak magnetic sand was analyzed using XRF and XRD to determine elemental composition as well as the type of mineral contained in the material. Elemental analysis showed that the weak magnetic sand contains 66.331% of iron, 13,120% of silicone, 9.216% of aluminum and 7.040% of titanium. The XRD analysis presented that crystalline phase in the sand consists of ilmenite, hematite, goethite, quartz and rutile.
Highlights
Iron sand is obtained from one of the waste treatments stages of bauxite residue called red mud, operated at PT
This study aims to determine the elemental composition and mineral characteristics of sand that was separated magnetically from the iron sand
Kemagnetan Pasir Besi Pesisir Pantai Aceh yang Diseparasi dengan Metode Mechanical Milling, Indonesian Journal of Applied Physics, 4(1), pp. 110-114. [5] Brouwer, P., 2010, Theory of XRF, PANalytical BV, The Netherlands. [6] Prasdiantika, R., dan Susanto, 2016, Preparasi dan Penentuan Jenis Oksida Besi pada Material Magnetik Oksida Besi Lansilowo, Jurnal Tekno Sains, Vol. No.1, ISSN 2443- 131, Hal 1-58 [7] Vidianti, I., A., dan Suprapto, 2014, Pemisahan Titanium Dioksida Dari Pasir Besi Kabupaten Lumajang Dengan Pelindingan H3PO4 Dan Agen Dekomposisi NaOH, Jurnal Sains dan Seni, Vol 1 No 1, Hal 1- 6
Summary
Sampel pasir besi yang digunakan merupakan residu bagian dari red mud yang diperoleh dari PT. Sampel yang diperoleh berada dalam keadaan basah sehingga dilakukan preparasi awal berupa pengeringan. Pasir besi dikeringkan di oven dengan suhu 100 °C selama 3 jam atau lebih sampai benar-benar kering. Selanjutnya didapatkan sampel pasir besi yang sudah kering dan diketahui bahwa pH sampel adalah netral.Pasir besi ini dikarakterisasi menggunakan XRF
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
