Abstract
The incorporation of lockable passive backbones into active compliant morphing systems efficiently results in lightweight, high-load, and large deformation systems. However, there exist challenges in kineto-static analysis due to the interaction between rigid reconfigurable kinematic constraints and the nonlinear deformation of actuated flexible limbs. This paper addresses these issues by developing a kineto-static method to analyze the motion in a novel planar 3-DOF shape-morphing manipulator. The manipulator features two actuated flexible limbs with a lockable variable geometry truss (LVGT). In this study, two isostatic topologies are selected for reconfigurable motion control under external tip loads. A multi-step sequential control strategy is proposed to maneuver the manipulator's platform for desired poses. Then, a constrained-trajectory-based kinematic model is proposed for an inverse kinematic solution considering motion planning. Subsequently, a kineto-static model is introduced, considering constraints from rigid and flexible limbs, aiming to distribute distributing redundant actuation forces. Finally, nonlinear finite element analysis (FEA) and experiments are carried out to validate the effectiveness of the proposed method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
