Abstract
Single phase icosahedral samples are obtained by annealing melt-spun Al75Cu15V10 amorphous alloys. The kinetics of this amorphous to icosahedral phase transformation were measured isothermally and nonisotheramally by differential scanning calorimetry and from changes in the electrical resistivity. Transmission electron microscopy and energy dispersive X-ray analysis indicate that the transformation proceeds polymorphically by nucleation and growth, ruling out a “micro-quasicrystal” model of the glass in this system. A standard Johnson-Mehl-Avrami analysis of the isothermal, transformation data yields Avrami exponents in the range 2–2.5, which are inconsistent with a polymorphic transformation. These anomalous Avrami exponent arise from an inhomogeneous distribution of quenched-in nuclei. Fits are made to a kinetic model assuming a constant nucleation rate and growth on these quenched-in nuclei. An analysis of the nucleation rates obtained from these fits gives an estimate for the interfacial energy between the icosahedral phase and the glass of 0.002 J/m2 ⩽ α ⩽ 0.015 J/m2, demonstrating that the short range order must be similar on both sides of the interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.