Abstract
Currently, the Morgantown Energy Technology Center, is actively investigating alternative hot fuel gas desulfurization sorbents for application to the Integrated Gasification Combined Cycle (IGCC). A sorbent must be highly active towards sulfur at high temperatures and pressure`s, and under varying degrees of reducing atmospheres. Thus, high conversion of the metal oxide and low hydrogen sulfide exit partial pressures. Also, it must regenerate nearly ideally to maintain activity over numerous cycles. Furthermore, regeneration must yield a sulfur product which is economically recoverable directly or indirectly. This cyclic process requires a holistic approach as any one criteria may eliminate a candidate sorbent from further consideration. Over fifty induration campaigns have been conducted among the fifteens Mn-based sorbent formulations. All indurated sorbents has been tested for crush strength and chemical analysis. Also, fifteen sorbent formulations have been tested in a TGA for at least on e induration condition. Subsequently described are the three main groups of formulations tested. They are the MnCO{sub 3} supported with TiO{sub 2} (with or without bentonite), MnCO{sub 3} supported with Al{sub 2}O{sub 3} (with or without porosity enhancers), and MnO{sub 2} ore supported with alundum (with and without bentonite).
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
