Kinetic Study of Catalytic Steam Gasification of Biomass by Using Reactive Flash Volatilisation

Abstract

AbstractReactive flash volatilisation is an autothermal process to convert biomass into tar‐free synthesis gas under steam‐rich conditions. This article studies the kinetics of reactive flash volatilisation by using Ni, PtNi, RuNi, ReNi, and RhNi catalysts supported on alumina. The rates of mass loss of cellulose, xylan, and lignin were measured and compared with those of the synthetic biomass mixture and pinewood sawdust. The kinetic parameters were calculated with and without catalysts by using a wire‐mesh isothermal thermogravimetric analyser in an equimolar steam/N2 atmosphere and high heating rates of 8.6×102, 1.1×103, and 1.3×104 °C min−1 at 700, 750, and 800 °C, respectively. The results revealed three distinct regimes of the rate of mass loss: pyrolytic decomposition, reforming, and char gasification. The catalysts increased the rate of mass loss in the reforming regime. RhNi and RuNi supported catalysts showed higher reforming rates than other catalysts. This study provides direct evidence of the in situ catalytic removal of tar during gasification of biomass.