Abstract
Background: In the process of carrying small forgings and other materials, the trajectory error of the 6-degree of freedom light-load collaborative robot will lead to the deviation of forgings placement position. The kinematics analysis and calibration of 6-degree of freedom light load collaborative robot are performed to solve the problem of trajectory error. Methods: The quaternion and cubic spline interpolation methods are adopted to plan the trajectory of the 6-degree of freedom light load collaborative robot. Based on the kinematic error model, the least squares estimation method is adopted to estimate the parameter error of the robot's connecting rod, and the parameter compensation values of each joint are obtained. Results: The kinematic calibration experiment shows that the coordinates of the robot end center are basically consistent with the actual coordinates after compensation, which verifies the rationality of the kinematic model and calibration method. Conclusions: The study lays the theoretical foundation for the trajectory error correction of the light load collaborative robot.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.