Abstract
To detect the joint angle of the manipulator accurately, a measuring method based on an IMU sensor is proposed. The sensor's attitude angles and corresponding rotation matrix are obtained according to the data of three-axis gyroscope and three-axis accelerometer. During the installation, the sensor's Z-axis direction is kept along with the motor's rotation axis direction, so that the angle of the sensor rotating around its Z-axis, which is the rotation angle of the motor, can be calculated by comparing the rotation relationship between the sensor's initial position and the sensor's position after the motor rotating. The largest source of result error derives from the inconsistent between the sensor's Z-axis direction and the motor's rotation axis direction. Consequently, an installation's error compensation method is designed to correct the sensor's Z-axis to the motor's rotation axis by rotating the related motor. The experiments show that the method can measure the joint angle of the manipulator accurately and calibrate the installation error effectively. The measurement result errors are confined <0.25°.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
