Jet impingement and the circular hydraulic jump on adverse-sloped beds

Abstract

Hydraulic jump type stilling basins are the most common hydraulic structures for decreasing the excess kinetic energy of flow and are divided into three types: classical, radial and circular basins. Previous studies have reported that the hydraulic characteristics of flow are more favourable in circular basins than in the other types. Therefore, theoretical/experimental modelling was applied to examine the characteristics of circular hydraulic jumps on adverse-sloped beds in circular stilling basins. The present theoretical model applies the momentum and energy equations to derive equations for the sequent depth ratio and relative energy loss of circular hydraulic jumps and classical hydraulic jumps (CHJs). Analysing the effectiveness of the dominant independent parameters showed that increasing the sequent radius ratio up to 2 and the bed slope up to −5% decrease the sequent depth ratio and length of the circular hydraulic jumps by about 30% and 60%, respectively, whereas the relative energy loss increases by about 30%. In addition to the correlation coefficient, different error functions were determined to analyse the precision of the derived semi-theoretical equations. The present circular stilling basin acts like a plunge pool, having a small water depth for low discharges to have a submerged jet condition, downstream of large dams.