Abstract
Abstract Jet centrifugal pump is essential equipment in multiple systems such as agricultural irrigation and energy production. This paper investigates the internal flow characteristics of jet centrifugal pumps at different flow rates and the cavitation behavior under high flow conditions by numerical simulation methods. Additionally, two performance optimization strategies are proposed based on simulation results. The findings indicate that high-velocity regions and low-pressure zones exist within the nozzle. As flow rate increases, the outlet velocity of the nozzle gradually decreases, and large areas of low pressure are observed near the inlet of the impeller. Cavitation occurs to varying degrees at flow rates of 4.056 m3/h and 3.840 m3/h. The turbulent kinetic energy contours for these conditions reveal uneven distribution within the jet nozzle, with higher values near the jet mixing layer, inner wall of the jet nozzle and impeller inlet. Structural optimization using hemispherical bolts significantly reduces the turbulent kinetic energy around the bolts, resulting in an increase in head ranging from 1.68% to 6.70% across various flow rates. Shortening the clearance between the impeller and the rear cover reduces energy losses, leading to an increase in head ranging from 2.72% to 5.86%.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
