Abstract
Wood chips are pretreated with steam prior to refining in the thermomechanical pulping process. The steam treatment dissolves part of lignin of wood chips in the spent liquor (SL) of this process, and subsequently the SL is sent to the wastewater system of the process. However, the lignin of SL can be used in the production of value-added chemicals, but it should first be separated from the SL in order to have a feasible downstream process. In this study, activated carbon (AC) was considered as an adsorbent to isolate lignin from SL. The results showed that the maximum adsorption of lignin on AC was166 mg/g under the optimal conditions of pH 5.2, 30 °C and 3 h treatment. Furthermore, the separation of lignin from SL was improved from 45% to 60% by having a two-stage adsorption process at pH 5.2, which also reduced the turbidity and chemical oxygen demand of SL by 39% and 32%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.