Abstract
The classic finite difference method (FDM) has been successfully adopted in the simulation of dendritic solidification, which is based on phase-field theory. Nevertheless, special strategies of boundary integral and projection are required for applying a supercooling rate to a droplet surface. In the present study, isogeometric analysis (IGA) is employed to discretize the phase-field equation due to the two advantages of Non-Uniform Rational B-Splines (NURBS) basis functions, namely an arbitrary order of derivatives and exact description of complex geometry. In addition, an improved, easy way to apply the supercooling rate on a melt droplet surface is proposed to avoid the integral and projection of the cellular boundary required in FDM. Firstly, dendrite growth in a square computational domain is simulated to verify the performance of IGA. Then, the influences of latent heat, anisotropic mode and initial angle on the dendrite shapes are studied by the presented IGA, FDM and finite element method (FEM). Finally, dendritic solidification in a droplet under different cooling rates along irregular boundaries is performed by the proposed IGA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have