Abstract
The electrochemical and photoelectrochemical approaches are well-suited for the selective reduction of carbon dioxide to the desired small organic molecules. Selectivity of the catalytic systems largely depends on the activing adsorptive (CO2) phenomena and the affinity of catalytic centers to the adsorbed carbon monoxide intermediates leading to their protonation or hydrogenation. Here application of aqueous or water-containing electrolytes is generally preferred. Furthermore, a compromise must be reached between the activity of a catalyst toward hydrogen evolution (water reduction) and its ability to promote reductive adsorption of CO2 and to generate moderate coverages of H atoms capable of stabilizing subsequent reduced intermediates. Our interest is in photoelectrochemical approaches utilizing p-type semiconductors as the main components of the CO2-reduction photocathodes capable of generating electrons with use of solar visible light. Among representative examples of semiconducting materials, transition metal oxides (e.g. Cu-based oxides, such as Cu2O, CuFeO2, CuBi2O4, CuNb2O6, Cu/Cu2O) could be considered. To improve stability against photocorrosion, to assure the sufficient electron-hole pair separation, as well as to increase population of electrons in the conduction band, mixed oxide systems combining the p-type semiconductor (e.g. Cu2O) with n-type semiconductors such as TiO2, SrTiO3 or KTaO3 have been proposed. To meet requirements for practical Cu2O-based photocathodes, not only the ability to absorb efficiently visible light and to assure fast interfacial electron transfers but also the stability issue needs to be addressed. Contrary to the poor performance of the pristine (bare) copper(I) oxide photocathode, the visible-light-illuminated photoelectrochemical reduction of carbon dioxide has been successfully performed using the p-type Cu2O-semiconductor (deposited onto the transparent fluorine-doped conducting glass electrode) over-coated with the ultra-thin films of various polymer or polynuclear type materials. In this respect, ultra-thin films of conducting polymers, supramolecular complexes (with nitrogen containing ligands and certain transition metal sites) or robust bacterial biofilms could be advantageous. For example, the oligoaniline over-layer [1] has been generated in the external methanol solution. Under such conditions, the copper(I) oxide photoelectrode does not change the oxidation state during photoelectrochemical diagnostic experiments. Thus the robust partially-polymerized aniline over-layer leads to stabilization of Cu2O against photocorrosion. Among important issues is the ability of CO2 to undergo adsorption (and activation toward reduction to CO) at both bare and oligoaniline-modified Cu2O. The proposed bi-layered photocathode has been demonstrated to produce such simple organic fuels as alcohols (mainly methanol). [1] Szaniawska E., Rutkowska I.A., Frik M., Wadas A., Seta E., Krogul-Sobczak A, Rajeshwar K, Kulesza P.J., Electrochim. Acta, 265, 400 (2018)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.