(Invited) Mulitjunction III-V Semiconductors for Photo-Electrochemical Hydrogen Production: Recent Progress in Efficiency, Durability, and Cost

Abstract

Photo-electrochemical (PEC) hydrogen production is a route to carbon-free fuel that combines light absorption and water electrolysis into one device. Challenging targets for solar-to-hydrogen (STH) efficiency, durability, and semiconductor absorber costs must be realized for this approach to be economically competitive with other hydrogen production pathways. Research on PEC hydrogen production at the National Renewable Energy Laboratory (NREL) has focused on III-V semiconductor absorber materials because their tunable bandgaps, high photon conversion efficiencies, and ability to make multi-junction structures have resulted in the highest STH efficiencies yet demonstrated. This talk will focus on recent NREL results showing progress toward PEC hydrogen production efficiency, durability, and cost targets. Specifically, we have been able to improve theoretically achievable STH efficiency through bandgap engineering in multijunction devices. Photon management strategies to close the gap between theoretical and measured STH efficiency will also be discussed. Durability remains a significant challenge for III-V materials in a PEC environment. We will describe modifications to the semiconductor surface and the electrolyte constitution that can make the photoabsorber less susceptible to photocorrosion during operation. Finally, we will present preliminary results on III-V PEC materials synthesized via hydride vapor phase epitaxy, an alternative route to high-efficiency photoelectrodes that could potentially have much lower costs than the metalorganic vapor phase epitaxy method traditionally used. These improvements have yielded III-V PEC devices that are close to the STH efficiency target (17% vs. 25%) while the demonstrated durability and cost are still considerably far from their target values.