Abstract
As a special type of joint fracture, the fracture evolution characteristics of parallel double joints have important engineering significance for the stability analysis of fractured rock mass. In this work, a new method for calculating stress intensity factor of parallel double-jointed fractures was importantly proposed. Physical uniaxial compression tests were carried out on parallel double jointed red sandstone filled with cement mortar under different geometric parameters, and the macroscopic mechanical properties and failure characteristics of red sandstone are deeply analyzed. The results show that the larger the connectivity rate is, the smaller the peak stress and strain are. The increase of connectivity rate will affect the change rate of transverse strain in the center of rock bridge. The closer the dip angle of the joint is, the lower the peak stress is and the shorter the failure time is. The damage mode of joint tip encroachment affects the lateral displacement of the rock bridge center, and the displacement is always close to the first damage section. The closer the joint tip is to the load, the easier the end-face penetrating cracks occur. The research content can provide basic support for guaranteeing the stability of underground engineering rock mass.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.