Abstract
In this work, the effect of Mo on the microstructure and properties of Ni-Mo-Al2O3 coatings by cold spraying was studied. The microstructure, composition, hardness, wear resistance and chlorine salt corrosion resistance of the coatings were analyzed by a scanning electron microscope, EDS, X-ray diffractometer, 3D profilometer, microhardness tester and friction wear tester. The results show that the coatings have low porosity and a uniform structure. The addition of Mo can improve the hardness, electrical conductivity, wear resistance and chlorine salt corrosion resistance of the coating but reduce the deposition efficiency of the powder. In general, the 80Ni-10Mo-10Al2O3 coating has the best comprehensive performance, with a hardness of 270.17 HV, friction coefficient of 0.4171 and corrosion rate of 0.287 g/m2·h in molten chloride.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
