Investigation on mechanical behavior of Al6061- coconut shell ash- granite dust reinforced hybrid metal matrix composites manufactured using stir casting technique

Abstract

Listen

Translate article

Owing to the superior qualities, aluminum metal matrix composites (AMMC) have recently been accepted and suggested as a replacement for traditional materials in a variety of sectors, including automotive, agriculture, aerospace, sports, marine, and many more. To satisfy the industrial requirement, it is necessary to develop economical material with higher mechanical properties like strength, hardness, impact resistance etc. To minimise the environmental impact and depletion of natural resources , it is necessary to Reduce, Recycle and Resuse the solid waste created across the world. This work aims to study the mechanical behavior of hybrid composite of Al6061 reinforced with coconut shell ash (CSA) and granite dust solid waste. Hybrid composite specimens were successfully manufactured using stir casting method. The proportion of granite dust was kept constant at 2 wt percent, whereas the percentage of CSA varied, ranging from 0% to 12% with a multiple of 3. Tests for tension, compression, hardness, and impact were performed to examine the mechanical behavior of the created hybrid composites. SEM & EDAX analysis were carried out to study the microstructure and elemental composition of the hybrid composites. Experimental testing shows that, when the percentage of CSA in the hybrid composite increased, its tensile strength, compressive strength, hardness, and impact strength increased maximum upto 23.65%, 10.12%, 60.89% and 17.38% respectively as compared to base alloy. The experimental findings demonstrated that when compared to matrix and other hybrid composites, the Al6061 alloy reinforced with 2% granite dust and 12% CSA hybrid composite had superior mechanical properties.