Abstract

This article reports a novel category of thermosetting composite prepared by compounding a high temperature resistant polysilylaryl-enyne (PSAE) resin with different volume fractions (vol%) of high dielectric constant Ca0·7La0·2TiO3 (CLT) ceramics. The microstructure, dielectric properties and thermal properties of the PSAE/CLT composites were fully investigated. The results show that the PSAE/CLT composite with an ultra-high dielectric constant and low dielectric loss (εr = 23.0 and tanδ = 3.4 × 10−3, at 10 GHz) was obtained when the filler volume fraction reached 60%. Meanwhile, the coefficient of thermal expansion of the composite was reduced to 15.1 ppm/°C which could match copper foils. And a high thermal conductivity of 0.918 W/(m·K) could be obtained at 60 vol% filler loading. The glass transition temperatures of the PSAE/CLT composites were over 450 °C which indicate that all the PSAE/CLT composites have an excellent temperature resistance. The novel PSAE/CLT composite has important application prospect in high-frequency communication under a harsh temperature environment.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.