Investigation of the strength behavior and failure modes of layered sedimentary rocks under Brazilian test conditions

Abstract

As the anisotropic behavior of sandstones and limestone along the Khorramabad-Zal expressway has not been studied, this research aims to examine the impact of layer orientation on the strength characteristics and failure patterns of layered sedimentary rocks using the Brazilian test. For this purpose, a total of 8 rock blocks were gathered from Kashkan sandstones and Sarvak limestones in three different locations along the Khorramabad-Zal highway in western Iran. The core specimens were drilled with 54 mm diameter and parallel to the laminations. Overall 150 disc-shaped specimens were subjected to Brazilian tensile strength (BTS) in ten different anisotropy angles, which refers to the angle between the loading direction and the lamination plane. The findings revealed that the highest and lowest BTS values were obtained at β = 70° and 20° for all three types of rock. After analyzing the samples that experienced the Brazilian test and examining their failure patterns, three primary modes of failure were identified: parallel to the lamination (PL), across the lamination (AL), and curved fracture (CF). Furthermore, the transitional angle, which signifies the point at which the dominant pattern of failure shifts from PL to AL or from PL to CF, was also determined.