Abstract
BaZrO3 ceramic cores were fabricated successfully by pressureless sintering. Effects of sintering parameters on properties and leaching characteristics of BaZrO3 ceramic cores were investigated carefully. When the holding time was constant, with the increase of sintering temperature, the linear shrinkage, bulk density and bending strength of BaZrO3 ceramic cores all gradually increased, but the apparent porosity gradually decreased. At the same sintering temperature, as the holding time increased from 0.5 h to 2 h, the linear shrinkage, bulk density and bending strength of BaZrO3 ceramic cores showed an increasing trend, while the apparent porosity exhibited an opposite trend. By further extending the holding time, the properties of ceramic cores were not significantly improved. Additionally, the prepared BaZrO3 ceramic cores showed excellent leaching characteristics in the boiled acid solution. Especially, for the BaZrO3 ceramic cores prepared at 1500 °C with 2 h, the leaching rate could reach the max value of 50%/h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
