Abstract
In the present work, multiwalled carbon nanotube (MWNT) thin films deposited by plasma enhanced chemical vapor deposition have been investigated as resistive gas sensors towards NO2. The sensor design is a platinum interdigitate electrode, fabricated by photolithography upon Si3N4 deposited on silicon, over which the MWNTs are deposited. Microstructural features as determined by scanning electron, transmission electron, and Raman spectroscopies have highlighted the growth of tubular carbon structures of 20–30 nm diameter and 150–200 nm length. Carbon nanotubes have shown a decreasing of their resistance upon exposure to NO2 gas (10–100 ppb) and the highest sensitivity at 165 °C working temperature. The time evolution of the electrical resistance at 165 °C as the sample was cycled through 500 ppm of NH3, 100 ppm of C6H6, water vapor, and 500 ppm of ethanol gases and dry air has been also reported. The variation of conductance in the presence of oxidizing or reducing gases is explained on the basis of charge transfer between the adsorbates and the nanotubes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.