Abstract
In this study, the effect of the changes in welding parameters on the tensile strength, which is one of the mechanical properties of the steels, was investigated in the robotic gas arc welding method applied to St52 and S460MC steels, which are widely used in the industry. As a result of the experiments carried out within the scope of the study, it was aimed to determine the optimum parameter values for the MAG welding method. St52 and S460MC materials were used in the experiments. An experimental design was created in order to carry out the experiments in the most accurate way. Parameter val-ues are placed in this created experimental design. As a result of the experiments per-formed according to the created the experimental design, the optimum parameter val-ues were examined, welding processes were applied with the selected values, and the improvements in the welding quality were determined by subjecting the welded samples to the tensile test. The optimum welding parameters providing the best mechanical properties were 25 V, 7 mm/sec and 13 mm/sec for the arc voltage, wire feed speed and welding speed, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Automotive Science and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
