Abstract

Under-ventilation and high energy consumption are some of the problems associated with school classrooms. Thus, it is necessary to develop a ventilation strategy that is characterized by high energy-saving and ventilation efficiency. To this end, this study aims to investigate natural ventilation as a possible strategy to improve the indoor environment while reducing ventilation loads and maintaining energy costs during intermediate seasons. Ventilation and cooling load reductions based on the opening and closing of several windows were analyzed. Window flow coefficients and ventilation rates were measured and used for computational fluid dynamics (CFD) simulation to obtain pressure coefficients for 16 wind directions. The results obtained showed that the improved natural ventilation strategy could be used to effectively establish required indoor conditions (26 °C, 60% RH). Additionally, compared with the mechanical ventilation system with variable refrigerant flow, this natural strategy resulted in a decrease in energy consumption of approximately 30%. However, its application requires that internal heat gain and CO2 emissions, which depend on human population density, as well as the room usage schedule should be considered.

Highlights

  • Owing to problems associated with the reduction of energy consumption and greenhouse gas emission, there has been increasing interest in the development of energy-saving systems and environmentally friendly building methods

  • In the building construction industry, to maintain a comfortable indoor environment and provide a better indoor air quality (IAQ), building ventilation is one of the most important parameters that is taken into consideration

  • Montazami et al [1] reported that aircraft noise, overheating, and poor air quality are some of the problems associated with classrooms in London

Read more

Summary

Introduction

Owing to problems associated with the reduction of energy consumption and greenhouse gas emission, there has been increasing interest in the development of energy-saving systems and environmentally friendly building methods. Many studies on indoor environmental control using natural environmental control approaches are being conducted around the world. In the building construction industry, to maintain a comfortable indoor environment and provide a better indoor air quality (IAQ), building ventilation is one of the most important parameters that is taken into consideration. School classroom under-ventilation and high energy consumption have been reported in the literature. Montazami et al [1] reported that aircraft noise, overheating, and poor air quality are some of the problems associated with classrooms in London. Their study established that overheating could be managed via ventilation control.

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call