Abstract

Current-Voltage (I-V), Capacitance-Voltage (C-V), Deep Level Transient Spectroscopy (DLTS), Laplace DLTS, Photoluminescence (PL) and Micro-Raman techniques have been employed to investigate the effect of the orientation of the substrates on the structural, electrically and optically active defects in dilute GaAs1−xBix epilayers structures having a Bi composition x = ~5.4%, grown by Molecular Beam Epitaxy (MBE) on (100) and (311)B GaAs planes. X-ray diffraction results revealed that the in-plane strain in the Ga(As,Bi) layer of the samples grown on (100)-oriented substrate (−0.0484) is significantly larger than that of the samples grown on (311)B-oriented substrate. The substrate orientation is found to have a noticeable impact on the Bi incorporation and the electrical properties of dilute GaAsBi Schottky diodes. The I-V characteristics showed that (100) Schottky diodes exhibited a larger ideality factor and higher barrier height compared with (311)B samples. The DLTS measurements showed that the number of electrically active traps were different for the two GaAs substrate orientations. In particular, three and two electron traps are detected in samples grown on (100) and (311)B GaAs substrates, respectively, with activation energies ranging from 0.12 to 0.41 eV. Additionally, one hole trap was observed only in sample grown on (100) substrates with activation energy 0.24 eV. The observed traps with small activation energies are attributed to Bi pair defects. The photoluminescence (PL) and Raman spectra have evidenced different compressive strain which affects considerably the optical properties. Furthermore, the PL spectra were also affected by different contributions of Bi- related traps which are different for different substrate orientation in agreement with DLTS results.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.