Investigation of negative permittivity in BaTiO3/TiN metacomposites at the radio frequency region

Abstract

The intriguing and unexpected properties of metacomposites have attracted significant attention, especially in terms of tuning their negative permittivity. In this study, we fabricated percolative BaTiO3/TiN (BTN) metacomposites employing mesoporous BaTiO3 nanoparticles synthesized via a novel solvothermal method as the matrix, combined with varying concentrations of TiN as the filler. Dielectric properties investigated in the frequency range of 100 Hz to 100 kHz unveiled a transition in the permittivity, shifting from positive to negative as the TiN content increased (primarily noticeable at frequencies above 10 kHz). The initial permittivity shifting is associated with an enhanced interfacial polarization, commonly recognized as Maxwell-Wagner-Sillars effect observed below the percolation threshold. Further, Lorentz model is attributed to induce dielectric resonance in the BaTiO3 matrix triggered by the Ti4+ ions in Ti–O octahedral sites leading to negative permittivity in conjunction with increase in TiN particles above the percolation threshold. Interestingly, AC conductivity exhibited an increase with increasing frequency when TiN content was lower. However, intriguingly, this frequency-dependence in the conductivity of BTN metacomposites did not hold as TiN content increased. Moreover, the investigation of reactance revealed the inductive character derived from the conductive network, a conclusion further confirmed through equivalent circuit analysis. The findings presented in this study are poised to unlock new possibilities in the design and development of metacomposites, ultimately facilitating practical applications of epsilon-negative materials in electromagnetic devices.