Abstract
The corrosion behaviors of Cr9Ni1 and Cr9Ni1Al in simulated harsh marine atmosphere were studied by dry-wet cyclic test (DWCT). Scanning electron microscopy (SEM), energy disperse spectroscopy (EDS) and electron probe microanalyzer (EPMA) were used to observe the cross-section morphology of rust layer. The composition of corrosion products were analyzed through X-ray diffractometer (XRD) and X-Photoelectron spectroscope (XPS). Electrochemical impedance spectroscopy (EIS) was used to determine the electrochemical properties of rusted samples. The results show that the corrosion rate of both 9Cr alloy steels increases continuously during the initial corrosion process of 576 h, which can be understood from α/γ*>1 of the rust layer and the acidification caused by increased CrO3. Interestingly, the addition of 0.7 % Al reduced the corrosion rate of 9Cr steel by more than 26 %. Al not only generates Al2O3 and Al(OH)3 enriched in the whole rust layer, but also optimizes the rust layer in terms of the Cr distribution, composition of Cr-containing compounds, and α-FeOOH content. Importantly, it is proposed that Al alloying weakens acidification through reducing CrO3 content and partial dissolution of the generated Al(OH)3.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
