Abstract

Steel hydrogen embrittlement (HE), a complex and multifaceted issue, can lead to sudden and catastrophic failure, without significant plastic deformation, making it a critical concern in the industrial sector. The present investigation focuses on the evaluation of HE effects regarding microstructure, mechanical properties degradation and type of fracture of AISI 1010 low-carbon steel, after accelerated hydrogen cathodic charging. Hydrogen was diffused electrolytically in 0.2 Μ H2SO4 solution, containing 3g/L of NH4SCN, using a cathodic current density of 10 and 20 mA/cm2, for 6 and 18 h. Mechanical properties were investigated through slow-rate tensile tests, as well as Charpy V-notch (CVN) impact tests, to determine the value of fracture toughness, both in uncharged and electrochemically pre-charged specimens. Vickers microhardness tests were conducted on the cross-sections of the hydrogen charged samples to evaluate embrittlement susceptibility, due to the presence of dissolved hydrogen. The microstructure modification was carried out through light optical (LOM) and scanning electron microscopy (SEM), in conjunction with an energy-dispersive X-ray detector (EDS). Slow scan X-ray diffraction (SSXRD) was also conducted for crystal structure analysis. The microstructure analysis showed the presence of large amounts of secondary cracks and cavities into the steel matrix, due to hydrogen diffusion and its accumulation at various sites. Hydrogen charging caused a significant gradual elongation decrease of the parent material, from 25% to 6.73%, in case of embrittlement at 20 mA/cm2 for 18h. Accordingly, after 18 h of exposure, the impact energy decrement was determined at 31.5%, at a current density of 10 mA/cm2, whereas the corresponding reduction at 20 mA/cm2 reached 68%.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call