Abstract

Gaseous and liquid fluids in agates (banded chalcedony—SiO2) of different localities were investigated systematically by thermogravimetry-mass-spectrometry within a temperature range from 25 to 1450 °C, for the first time. Chalcedony and macrocrystalline quartz from twelve agate samples were investigated, from Germany (Schlottwitz, St. Egidien, Chemnitz and Zwickau), Brazil (Rio Grande do Sul), Scotland (Ayrshire) and the USA (Montana). They originate from mafic and felsic volcanic rocks as well as hydrothermal and sedimentary environments. The results were evaluated regarding compounds of hydrogen with fluorine, chlorine, nitrogen, carbon and sulphur. Additionally, oxygen compounds were recognized with hydrogen, fluorine, nitrogen, sulphur and carbon. The nature of the compounds was identified based on their mass-charge-ratio and the intensity ratios of the associated fragments. Due to interferences of different compounds with the same mass-charge-ratio, only H2O, HF, NO, S, SO, CO3—as well as several hydrocarbon compounds (for example CO32− or CO)—could be properly identified. The main degassing temperatures were detected at around 500 and 1000 °C. Generally, a difference between quartz and chalcedony regarding the composition of their fluids could not be found. The results indicate a silica source for the agate formation from aqueous solutions but also a possible role of fluorine compounds. Additionally, CO2 and other fluids were involved in the alteration of volcanic rocks and the mobilization and transport of SiO2.

Highlights

  • Agates are spectacular products of nature, which have been investigated for decades regarding the conditions of their formation (e.g., [1,2,3,4,5,6,7,8,9,10])

  • The process of agate formation is as complex as its composition and may differ depending on the type of parent rocks and formation environment

  • The results of the experiments illustrate that there is a number of fluids present in chalcedony and macrocrystalline quartz of agates of different genetic types and from different occurrences worldwide

Read more

Summary

Introduction

Agates (banded chalcedony—SiO2 ) are spectacular products of nature, which have been investigated for decades regarding the conditions of their formation (e.g., [1,2,3,4,5,6,7,8,9,10]). Agates have a very complex composition consisting of certain SiO2 polymorphs and morphological quartz varieties (e.g., [4,11,12,13]). Quartzine, opal-A, opal-CT and/or moganite can be intergrown or intercalated with chalcedony layers and macrocrystalline quartz in agate. The process of agate formation is as complex as its composition and may differ depending on the type of parent rocks and formation environment. Most agates occur in volcanic host rocks

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call