Investigation of Flow Control in an Ultra-Compact Serpentine Inlet with Fluidic Oscillators

Abstract

For optimal aerodynamic efficiency of specific ultra-compact serpentine intake, fluid oscillators are utilized to regulate airflow. This study employs advanced numerical simulation techniques to examine the effects of various control positions, jet angles, and excitation pressures on flow control efficacy. Control position significantly impacts the flow field structure within the intake, with a lower surface jet configuration outperforming an upper surface scheme. Optimal performance is achieved with the upper and lower surface jet angles set at 20° and 25°, respectively, under an input pressure of 2.5 times the total inlet pressure. This configuration enhances the total pressure recovery coefficient and reduces the steady-state circumferential distortion index and circumferential total pressure distortion coefficient. However, the flow rate ratio coefficient is notably high. While higher excitation pressures for the fluid oscillator do not inherently exhibit greater effectiveness, careful calibration is essential to accommodate varying positions. Optimal excitation pressure is established for the upper surface, while the control effect on the lower surface improves with increasing excitation pressure. Jet angles significantly affect the fluid oscillator’s control mechanism; small-angle jets effectively add energy to the separation zone, mitigating flow separation, whereas larger jet angles introduce excessive disturbances that outweigh their benefits. Overall, smaller jet angles enhance control effectiveness.