Abstract
AbstractThe Royal Netherlands Air Force (RNLAF) conducts frequent operations of Chinook helicopters with external slung loads. The normal RNLAF practice is for large external loads to be underslung by means of a two-strop suspension system backed up by a third point of suspension, the so-called ‘redundant HUSLE (Helicopter Underslung Load Equipment)’ comprising a redundant set of slings which come into action if one of the normal strops fails. The redundant HUSLE is relatively expensive in terms of time and operating costs. The present work has investigated the behaviour of a Chinook helicopter with an underslung load following failure of a front or rear strop, to determine whether the three-point suspension system can be safely replaced by a two-point suspension, eliminating the redundant HUSLE. The paper will demonstrate that although in general the redundant HUSLE results in a less violent helicopter reaction to a cable failure, it does not necessarily guarantee safety. It is concluded that flying with loads up to around two tonnes could be done safely with a two-point suspension system. A novel feature of this analysis of helicopter operations with slung loads is the integrated approach used for simulating pilot-in-the-loop load failures using a full non-linear model.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
