Investigating the most appropriate methods for attached solids determination in moving-bed biofilm reactors.

Abstract

Moving-bed biofilm reactors (MBBR) have been employed worldwide as an efficient technology for the treatment of a diverse set of wastewaters. Although the attached biomass represents the major fraction of solids in MBBR systems, there is still no standard for its reliable quantification. An extensive literature review indicated that several methods for attached biomass assessment are applied, hindering the comparability of results issued from different studies. Therefore, the most reported methods for biofilm quantification in the MBBR literature were compared using three different carriers. The results revealed that the performance of each method was biased depending on the carrier type and shape. Moreover, differences in total attached solids (TAS) concentrations varied from 13% up to more than 90%, depending on the employed method for a given carrier. Overall, direct weighing of the carrier containing the biofilm, accounting for the clean carrier weight, and manual extraction of the biofilm, preceded or not by sonication for at least 15min, were the most suitable techniques for assessing TAS and the volatile/total solids ratio in non-porous medias, respectively. The results here presented may be used as a frame of reference for standardization of the methods for assessing the biofilm mass in MBBR carriers.