Abstract
Aims: The aim of this study was to evaluate the mechanical properties of polymer nanocomposites (PNCs) reinforced with multiwalled carbon nanotubes (MWCNT). Methods: Mixing MWCNT into the polymer at very small propositions can enrich the mechanical properties of the polymer nanocomposites. Testing Specimen fabricated with 0.1wt%, 0.5wt%, 1wt% mixing ratios using extrusion and injection molding process. Computational analysis was performed through the square RVE model and analyzed with finite element analysis (FEA) using DIGIMAT simulation tool. The specimen was evaluated by ASTM D3039 for tensile strength and ASTM D7264 for flexural. Results: The simulated results were compared with experimental results. Scanning electron microscopy(SEM) was performed to evaluate the dispersion state of nanotubes in the matrix. Conclusion: The impactful improvement in mechanical properties is shown in the results after addition of functionalized MWCNTs (f-MWCNT) compared to pure polymer and non- functionalized MWCNT composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.