Abstract
Conventionally, there are two basic configurations for microbial fuel cell (MFC), one with anode and cathode chambers, as known as dual-chamber MFC, one with only anode chamber and a air–cathode, called single-chamber MFC. However, electrode materials' complex configuration and high resistance limit their practical applications in power generation and wastewater purification. To this end, we constructed three MFCs using carbon felt, Ni/Ti, and Ag-Ni/Ti as anodes based on our previously constructed integrated chamber-free MFC (iMFC). After 21 days of operation, the Ag-Ni/Ti-MFC performed best in bioelectricity output and removal of target pollutants. The bioelectricity output parameters were an open-circuit voltage of 0.773 V, a maximum current density of 552.1429 mA/m2, and a power density of 426.8064 mW/m2. Furthermore, the MFC achieved removals of 67.90% for the chemical oxygen demand (COD), 55.20% for total nitrogen (TN), and 61.83% for ammonia nitrogen (NH3-N). Introducing silver nanoparticles to the transmembrane and outer membrane boosted the charge extraction efficiency in the MFCs. Moreover, 16S rDNA analysis indicated that typical electricity-producing bacteria, including Comamonas, Paraclostridium, and Asaccharospora, had a higher relative abundance in the Ag-Ni/Ti-MFC anode than in other anodes. Overall, the surface structure of different anode materials plays a critical role in bioelectricity generation and wastewater purification using iMFC by affecting the mass transfer of substrates and metabolites.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call