Investigating mechanisms of debris removal in ultrasonic vibration-assisted EDM drilling

Abstract

In traditional electrical discharge machining (EDM) of micro-holes, the debris removal becomes increasingly challenging as hole depth increases, significantly affecting the machining of difficult-to-machine materials. To address this issue,we first developed a micro-hole gap flow field model for a novel longitudinal–torsional ultrasonic vibration (LTV) electrode EDM drilling method. We analyzed the effects of three types of electrodes — rotation electrodes, longitudinal ultrasonic vibration (LUV) electrodes, and LTV electrodes — on the flow velocity in the micro-hole interstitial flow field. Next, we simulated the motion of fluid and debris in the interstitial flow field of micro-holes, theoretically verifying the advantage of electrode ultrasonic vibration in enhancing debris removal efficiency. Additionally, we observed the electrode tip morphology, the elemental composition on the electrode surface, and the morphology of the micro-hole inlet/outlet and inner wall to further elucidate the debris removal mechanism and confirm the superior drilling performance of the ultrasonic vibration electrodes. At an optimal ultrasonic amplitude (AL=4μm), the LUV electrode demonstrated improved consistency in the micro-hole inlet/outlet and achieved a micro-hole taper of 0.014°. The material removal rate (MRR) using the LTV electrode reached 5.14 × 105μm3/s, nearly 1.5 times higher rotation electrode. This method successfully produced a positively tapered hole suitable for injector nozzles.