In Situ Observation of Bubbles and the Effect of Ultrasonic Vibration on Bubble Behavior in EDM.

Abstract

Accumulation and concentration of debris in deep hole electrical discharge machining (EDM) significantly hinder its machining efficiency and accuracy. It is believed that the movement of bubbles associated with the discharge gap flow field play a pivotal role in debris removal and influence the discharge conditions. Ultrasonic vibration (USV) of the electrode is thought to be an effective method for improving EDM-generated bubbles and debris exclusion. In this study, we first elucidated the behavior of bubbles during EDM of holes with varying aspect ratios. Subsequently, USV was introduced to EDM. The behavior of dielectric fluid flow under the influence of ultrasonic vibration was analyzed using computational fluid dynamics (CFD), which revealed time-varying changes in discharge gap flow pressure and velocity. The velocity of the dielectric flow field near the electrode's side face was found to reach a maximum of approximately 15.2 m/s, greatly facilitating debris removal. High-speed camera observations revealed that bubbles were dispersed within the side gap, with most of them adhering to the electrode's wall. Furthermore, the bubbles exhibited a tendency to continuously break up and coalesce near the hole's outlet before escaping in the USV-assisted EDM. These observed characteristics of bubble behavior under the influence of USV are expected to significantly enhance debris removal and promote efficient dielectric exchange.