Abstract

PurposeWith a growing list of available materials and processes, the inherent mechanical and thermophysical properties of three-dimensional (3D) prints are important design targets. This paper aims to study the functionality of binder jet 3D printed objects for thermally activated building construction elements and recyclable formwork for concrete structures.Design/methodology/approachBinder jet printed sand samples with various material and post-processing parameters (infiltration and baking) are prepared and studied. Using a statistical experiment design, the mechanical (flexural and compressive strength) and thermal (conductivity and specific capacity) characteristics are quantified.FindingsRelative to the unprocessed “green” print samples, post-processing improved the flexural and compressive strength of the samples by factors of 6.9 and 21.6, respectively; the thermal conductivity and specific heat capacity were improved by factors of 7.7 and 1.2, respectively. For the investigated temperature range (20°C–200°C), the “green” prints showed excellent stability while the stability of post-processed samples depended on the infiltrate used. Microscopic images of the microstructures offered evidence to support improvement in the mechanical and thermo-physical characteristics of the 3D printed sand elements.Research limitations/implicationsThe literature review concluded that optimal printing parameters and infiltration under vacuum could further improve the mechanical and thermo-physical properties of the binder jet printed elements. However, both these factors were not explored in this research. The statistical experimental design approach provided more flexibility to choose the number of experiments for a fixed amount of time and resources. However, for future work, a more extensive number of experiments and reproducibility testing for each combination of binder-infiltrate is recommended.Practical implications3D printing has been identified as a promising opportunity to reduce material usage and improve construction efficiency in the field of architecture and building engineering. The emerging fabrication technologies are further expected to significantly reduce the operational energy of buildings through performance integration, i.e. multi-functional building elements with integrated heat- and mass-transfer capabilities to replace conventional systems.Originality/valueThis study has quantified the impact of infiltration on the mechanical and thermo-physical characteristics of sand-printed elements and, as such, reports reproducible functional performance maps for sand-print applications. The research demonstrates a way to achieve the desired functional characteristics of 3D prints through combinations of material selection and process/post-processing parameters.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call