Introducing a Novel Light Scattering Technique for Visualising Operando State-of-Charge Changes Within Individual Active Particles and Across the Electrode

Abstract

In our presentation we will demonstrate the application of a recently developed operando optical microscopy technique to mechanistic studies of lithium-ion battery electrodes and active material characterisation. Our technique probes state-of-charge (SoC) changes in the active particles within the electrode during battery operation, based on the intensity variation of scattered light across each active particle. This enables detailed spatially resolved data on an individual particle level to be utilised for furthering mechanistic understanding of battery capability and degradation, and it also allows global statistics to be established for the optimisation and screening of new electrode materials. The technique is agnostic to the underlying battery chemistry, so in principle can be applied to study any battery electrode.In this talk, we will demonstrate how our technique can be used in the study of two key dynamic processes, solid-state ion transport and mechanical degradation. The ability to quantify ion transport during battery operation helps to provide insights into how lithium-ion dynamics affect the (de)lithiation mechanisms and degradation mechanisms of battery electrodes, which is crucial to improving their electrochemical performance. Using lithium cobalt oxide (LCO) as a case study, we will show how ion-transport mechanisms can be deduced by observing moving phase boundaries within particles during cycling.We will then demonstrate how local SoC changes within Ni-rich nickel manganese cobalt oxide (NMC) active particles can be visualised during operation, and how the intra-particle ion gradients identified can be used to determine the mechanistic origins of first-cycle capacity losses. Building on this, we will highlight how variation in the rates of (dis)charge between a population of active particles could be used to characterise the performance of new electrode compositions.In addition, we will highlight how lithium-ion concentration gradients can also be identified in high-rate niobium tungsten oxide (NWO) anode materials during initial lithiation and under initial rapid delithiation conditions and demonstrate how this can lead to particle cracking. Expanding on this, we illustrate how the proportion of cracked particles within an electrode can be quantified and then monitored over successive cycles as a potential metric for screening the stability of new electrode materials.