Abstract
This paper proposes a maximum power point tracking (MPPT) scheme for direct drive permanent magnet synchronous generator (PMSG) wind turbine system. In this scheme, the machine side converter (MSC) is controlled using the interval type-2 fuzzy logic control (IT2-FLC). The IT2-FLC is proposed owing to its ability to handle the uncertainties of the system parameters. The additional degree of freedom of type-2 fuzzy sets is due to the third dimension in the membership function which handles power oscillations damping and voltage recovery following parameter uncertainties in the network. The field oriented control is used to control the machine side and grid side converter. The design of the proposed control scheme of the MSC is presented in this paper. Simulation results, based on MATLAB-Simulink, for a 1.5 MW PMSG wind turbine are carried out to validate the proposed control scheme considering the various uncertainties. Also, experimental results with hardware in loop (HIL) configuration are obtained for reduced scale PMSG wind turbine to demonstrate the feasibility of the controller for real time applications. The results show a significant enhancement in speed regulation, mechanical stress reduction and power harvest with the proposed control scheme.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Renewable Energy Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.