Abstract
AbstractA series of cold‐setting epoxy polymers, plasticized with different amounts of plasticizer, ranging between 0 and 90% by weight of the amount of the epoxy prepolymer, were studied for their mechanical, optical, and fracture behavior properties. Quantities defining the mechanical properties were considered: the elastic modulus E, Poisson's ratio v, and fracture tensile stress σf. These were accurately measured with electric strain gauges in specimens tested in a 5‐ton Instron tester. The optical behavior was characterized by the stress optical coefficients of the materials in both principal directions, α and β, as well as by the coefficient of optical anisotropy, ζ. The values of these quantities were measured by a Fizeau interferometric method. Finally, the optical method of caustics was applied to cracked epoxy polymer specimens to provide a new experimental technique for determining the stress optical properties of these polymers in terms of their mechanical properties. This method was used to check the previous results found by established experimental methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.