Abstract

Fiber reinforced plastics can absorb energy, in the unlikely event of a crash, on the other hand, foam improves the structural integrity of the device being filled with. Therefore, foam-filled carbon fiber reinforced plastic (CFRP) composites are extensively used as an energy absorber for safety enhancement. Current study aims to characterize the impact response of CFRP composite tubes filled with polyurethane foam with five different combinations. The CFRP tubes were internally stiffened with sheets, tubes and hats made of CFRP composite. In addition, the internally stiffened tubes were filled with polyurethane (PU) foam for structural integrity. Specimens were then tested under dynamic crushing using a drop weight impactor with an impact energy of 75 J. During the tests, the behaviors of specimens were recorded by high speed camera. Visual inspections and micrographs of the specimens were also investigated. The results revealed that the peak force, threshold force, and energy absorbed were increased by using the PU foam inside the CFRP composite tubes. The energy absorption did not show significant improvement by adding the internal CFRP reinforcements, whereas, the peak load improvement was considerable. The specimen filled with only PU foam yielded the best specific energy absorption among all the specimens.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call