Abstract
Load transfer is the main responsibility for improving mechanical properties of fiber reinforced metal composites, but it is significantly affected by interfacial phase. Short carbon fiber reinforced Nb/Nb5Si3 composites were successfully fabricated at different temperatures. Interfacial Nb4C3 is a nanoscale formed by in situ reaction, and the diameter and volume fraction of Nb4C3 phases increase with the fabrication temperature increasing. Due to the Nb4C3 phases are intimately attached to carbon fibers and tightly embedded in the matrix of composites, an anchor effect is induced between fibers and matrix. The load transfer of interface in composites was discussed, which is affected by the Nb4C3 phases. The interfacial Nb4C3 phases help to increase the load transfer efficiency, but also damage the carbon fiber, resulting in that carbon fiber can not effectively bear the transferred load but fracture. A relationship of the load transfer efficiency with the equivalent diameter of Nb4C3 phase was established. For regulating the load transfer efficiency, the control method of the equivalent diameter of Nb4C3 phase was established innovatively, which indicates that the equivalent diameter can be adjusted by fabrication temperature and time. This work provides new viewpoints for disclosing the load transfer in composites containing interfacial nano-sized phase.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call